Intended Use; Scope Of Delivery; Description Of Parts; Technical Data - Silvercrest SDMF 1300 B1 Operation And Safety Notes

˜ Intended use
This product is intended for steam smoothing of
textiles . Do not use it for any other purpose .
This product is only intended for private
household use, not for commercial purposes .
The manufacturer accepts no liability for
damages caused by improper use .
˜ Scope of delivery
After unpacking the product, check if the delivery
is complete and if all parts are in good condition .
Remove all packing materials before use .
1 x Steam brush
1 x Removable water tank
1 x Brush
1 x Instruction manual
˜ Description of parts
(Fig . A)
Steam nozzles
1 ] [
Brush
2 ] [
(Steam button with lock)
3 ] [
(Water tank opening)
4 ] [
Water tank
5 ] [
Base
[ 6 ]
MAX marking (max . water fill level 250 ml)
7 ] [
Power cord (with anti-kink protection) and
8 ] [
power plug
(Release buttons – on both sides of the
[ 9 ]
water tank)
Handle
[ 10 ]
(Fig . B)
LED
[ 11 ]
On/off switch (O/I)
[ 12 ]
˜ Technical data
Input voltage: 220 – 240 V∼, 50 / 60 Hz
Power consumption: 1190 – 1400 W
Protection class: I
Safety instructions
BEFORE USING THE PRODUCT,
PLEASE FAMILIARISE
YOURSELF WITH ALL OF
THE SAFETY INFORMATION
AND INSTRUCTIONS FOR
USE! WHEN PASSING THIS
PRODUCT ON TO OTHERS,
PLEASE ALSO INCLUDE ALL
THE DOCUMENTS!
In the case of damage resulting
from non-compliance with
these operating instructions
the warranty claim becomes
invalid! No liability is accepted
for consequential damage! In
the case of material damage
or personal injury caused by
incorrect handling or non-
compliance with the safety
instructions, no liability is
accepted!
GB/IE 19