Opening Stop Distance; Closing Stop Distance - Nice M-BOARD Installation And Use Instruction

LOW
4 times
LONG AVERAGE

22 - OPENING STOP DISTANCE

Attention: This function works only on machine models that do not
have limit switches, and model identification is done automatically
during the path learning process.
In this function it is possible to adjust the distance that the control unit
will turn off the engine in the open direction before touching the stop.
PROG SWITCH POSITION
1 time
LOW
4 times
AVERAGE

23 - CLOSING STOP DISTANCE

Attention: This function works only on machine models that do not
have limit switches, and model identification is done automatically
during the path learning process.
In this function it is possible to adjust the distance that the control unit
will turn off the engine in the close direction before touching the stop.
LOW AVERAGE
5 times
LONG
OPENING STOP DISTANCE
LED BLINKS
2 times
LOW AVERAGE
5 times
HIGH
ENGLISH
AVERAGE
PROGRAMMING
3 times
AVERAGE
-
-
-
-
79