Closing Deceleration Ramp; Minimum Opening Distance - Nice M-BOARD Installation And Use Instruction

1 time
SHORT
4 times
LONG AVERAGE

19 - CLOSING DECELERATION RAMP

To set the deceleration ramp set the PROG switch to the position as
shown in the figure below, and press the LEARN button according to
the desired setting:
PROG SWITCH POSITION
1 time
LOW
4 times
LONG AVERAGE

20 - MINIMUM OPENING DISTANCE

In this configuration, the control panel calculates the current distance
from the deceleration ramp to the opening limit switch and keeps the
engine speed to a minimum until it reaches the limit switch.
LED BLINKS
2 times
SHORT AVERAGE
5 times
LONG
LED BLINKS
2 times
LOW AVERAGE
5 times
LONG
ENGLISH
AVERAGE
PROGRAMMING
CLOSING DECELERATION
RAMP
3 times
-
-
3 times
AVERAGE
-
-
77