Gate Type; Partial Opening - Nice M-BOARD Installation And Use Instruction

32 - GATE TYPE

In this mode it is possible to configure in which gate the control panel
is installed.To configure the type of gate installed set the PROG swit-
ch to the position as shown in the figure below, and press the LEARN
button according to the gate type:
PROG SWITCH POSITION
1 time
SLIDING

33 - PARTIAL OPENING

In this mode it is possible to set the gate opening percentage when
the remote control configured as partial opening is activated.
To set partial opening set the PROG switch to the position as shown
in the figure below, and press the LEARN button according to desired
setting:
PROG SWITCH POSITION
86
LED BLINKS
2 times
ROCKER
ENGLISH
PROGRAMMING
GATE TYPE
3 times
PROGRAMMING
PARTIAL
OPENING
-