Chengdu Ebyte Electronic Technology Co.,Ltd
5.2 WOR mode (mode 1)
Type
When the M0 indicator light is on and the M1 indicator light is off, the DTU is working in mode 1
Description
WOR transmission mode, data packet comes with wake-up code
5.3 Power Saving mode (mode 2)
Type
When the M0 indicator light is off and the M1 indicator light is on, the DTU is working in mode 2
Description
WOR receiving mode, saving its own receiving power consumption, this mode cannot transmit
5.4 Configuration mode (mode 3)
Type
When the M0 indicator light is on and the M1 indicator light is on, the DTU is working in mode 3
Description
The DTU can be programmed using the configuration software
6. PC Configuration Instruction
The following figure shows the display interface of the E95/E96-DTU(433LXX-485)-V8 configuration host computer. The
user can switch to the configuration mode through the MODE button, and quickly configure and read the parameters on the host
computer.
Copyright ©2012–2022,Chengdu Ebyte Electronic Technology Co.,Ltd.
E95/E96-DTU(433Lxx-485)-V8 User_Manual_EN
11