Ebyte E95-DTU433L 485-V8 Series User Manual page 6

Chengdu Ebyte Electronic Technology Co.,Ltd
If the customer needs to switch the working mode, it can be controlled by the Mode button to switch between different
5
working modes (M0 indicator, M1 indicator). Hold and press the Mode button for 1 second and release it to switch the
mode once. The mode switching details are shown in the table below:
No.
Type
Transparent
Mode 0 Transmission
Mode
Mode 1 WOR Mode
Power Saving
Mode 2
Mode
Configuration
Mode 3
Mode
Note:
The DTU has a power-down save mode function (the factory default setting is transparent transmission mode), the user

needs to switch the corresponding mode according to the M1 and M0 indicators (effective immediately).
"Quick Start" uses "E95-DTU (433L20-485)" as an example, other models refer to the configuration, pay attention to the

power input of the AC equipment.
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
M1 M0
Light Light Serial port open, wireless open, transparent transmission
Off Off (factory default mode)
Light Light
WOR transmission mode, data packet comes with wake-up code
Off On
Light Light WOR receiving mode, saving its own receiving power
On Off consumption, this mode cannot transmit
Light Light
The DTU can be programmed using the configuration software
On On
E95/E96-DTU(433Lxx-485)-V8 User_Manual_EN
Description
3