Renesas RX Family
1. Kit Overview
The CK-RX65N, Cloud Kit for RX65N MCU Group, enables users to experience the cloud connectivity
options available from Renesas and Renesas Partners. A broad array of sensors on the CK-RX65N provide
multiple options for observing user interaction with the Cloud Kit. By selecting from a choice of add-on
devices, multiple cloud connectivity options are available.
MCU Features
•
R5F565NEHDFB MCU (referred to as RX MCU)
•
120 MHz, RX CPU (RXv2)
•
2 MB Code Flash, 32 kB data flash, 640 kB SRAM
•
144 pins, LQFP package
•
MCU current measurement points for precision current consumption measurement
•
Multiple clock sources - RX MCU oscillator and sub-clock oscillator crystals, providing precision
24.000 MHz and 32,768 Hz reference clock. Additional low-precision clocks are available internal to the
RX MCU
Ecosystem Access and Connectivity
• USB Full Speed Host and Device (micro AB connector)
• Two 5 V input sources
USB (Debug, Full Speed)
External power supply (using traditional pin header)
• Debug modes
Debug on-board (SWD)
• User LEDs and buttons
Four User LEDs (red, blue, green, RGB)
Power LED (white) indicating availability of regulated power
Debug LED (yellow) indicating the debug connection
One User button
One Reset button
• Two of the most popular ecosystems expansions
2 Digilent Pmod
TM
Arduino
TM
(Uno R3) connector
• MCU boot configuration jumpers
• Ethernet (RJ45 RMII interface)
Sensors
• Renesas HS3001 Humidity and Temperature sensor
• Renesas ZMOD4410 Indoor Air Quality Index sensor
• Renesas ZMOD4510 Outdoor Air Quality Index sensor
• Renesas OB1203 Biometric sensor
• TDK ICP-10101 Barometric Pressure sensor
• TDK ICM-20948 IMU (Gyroscope, Magnetometer, Accelerometer)
• Knowles SPU0410LR5H-QB MEMS Microphones in stereo configuration
R20UT5100EG0100 Rev. 1.00
May.17.22
(SPI and UART) connectors
CK-RX65N v1 – User's Manual
Page 5 of 27