How To Set The Measurement Range For The Identi-Fish Graph - Furuno FSS-3BB Operator's Manual

2.2.2 How to set the measurement range for the IDENTI-FISH
graph
Note: The following setting can also be performed using recorded echo data.
1. Show the IDENTI-FISH
2. On the InstantAccess
FISH] icon (
3. If the header is not displayed, put the cursor at the top edge of the screen.
4. Click [ID AREA] in the header, then scroll to select [ID1] or [ID2]. The [ID AREA]
indication is highlighted in green. You can set two measurement ranges ([ID1],
[ID2]) on the IDENTI-FISH
[ID AREA]
5. Place the cursor at the top-left corner of the area. Push the left button, drag the
frame to the location for the bottom-right corner, then release the left button. A
IDENTI-FISH
been set, the model data histogram, fish species name, and similarity value (nu-
merical value and bar graph) are displayed.
Measurement range (ID:1 Blue frame, ID2: Pink frame) Measurement range (ID:1 Blue frame, ID2: Pink frame)
Note: You can adjust the location and size of the area by turning off [Selected
Area Scroll] in the [IDENTI-FISH] menu. See page 2-12.
6. Do steps 4 and 5 to set the other area, if necessary.
™
echo display in the single or combination display.
™
bar, click the [Sounder] icon (
).
™
echo display.
™
graph appears for the ID no. selected at step 4. If model data has
2. GRAPH FUNCTIONS
) followed by the [IDENTI-
TM TM
[ID2] IDENTI-FISH [ID2] IDENTI-FISH graph graph
IDENTI-FISH IDENTI-FISH TM TM histogram is pink. histogram is pink.
[ID1] IDENTI-FISH [ID1] IDENTI-FISH TM TM graph graph
IDENTI-FISH IDENTI-FISH TM TM histogram is blue. histogram is blue.
™
2
2-3