How To Set The Alarms - Furuno FSS-3BB Operator's Manual

1.21.2

How to set the alarms

To set the conditions for each alarm, do the following:
1. Click the [Advanced Settings] icon (
the [Advanced Settings] icon (
2. Click the [Alarm] menu to show the [Alarm] menu (right-side of the window).
FSS-3BB [ 00252470-xx.xx ]
3. Refer to the table below to set the alarms.
Menu item
[Bottom]
[Fish (Normal)]
[Fish (B/L)]
[Fish Level]
Calibration
Set the bottom starting depth ([From]) and bottom span range [Span]
for the depth alarm. The distance set here is measured from the loca-
tion of the transducer face.
Set the starting depth ([From]) and span range [Span] for the fish alarm.
The distance set here is measured from the location of the transducer
face.
Set the starting depth ([From]) and span range [Span] for the bottom
fish alarm. The distance set here is measured from the location of the
transducer face.
Set the echo strength at which the fish alarms are triggered. This set-
ting is for both the [Fish Alarm] and the [Bottom Fish Alarm].
• [Weak]: Echoes stronger than light blue trigger the alarm.
• [Medium]: Echoes stronger than yellow trigger the alarm.
• [Strong]: Echoes stronger than red trigger the alarm.
) from the InstantAccess bar™, then click
) to show the [Advanced Settings] window.
Description
[ Bottom Span Range ]
1. OPERATION
[ Bottom Start Depth ]
1-29
1