Table of Contents
Advertisement
4. ADVANCED SETTINGS
FSS-3BB [ 0252470-xx.xx ]
Calibration
Menu item
[Stabilization]
[Stabilization Sensor]
[Delay Time [msec]]
[Stabilization Area]
4-16
Turn heaving compensation on or off. Turn it on when seas are rough to
get stable echoes. When turned on, the stabilization icon (
in the [Picture Advance] indication in the header.
Note: Where data from the SATELLITE COMPASS
the stabilization icon is overlaid with a cross to indicate that it is not in use.
When data from the SATELLITE COMPASS is received again, the cross
is removed.
Selects the SATELLITE COMPASS
The sensor is optimally set up during installation. Do not change this set-
ting.
Operative when [Stabilization Sensor] is set to [Manual]. This item is opti-
mally set up during installation. Do not change this setting.
When heaving exceeds the value set here, stabilization is stopped and an
"X" is overlaid on the stabilization icon at the top of the screen, indicating
stabilization is stopped. However, the setting for [Stabilization] is kept
[On]. When heaving is once again less than the value set here, stabiliza-
tion is restarted and the "X" disappears.
Description
™
™
model connected to the FSS-3BB.
) appears
is interrupted or lost,
Advertisement
Table of Contents
Troubleshooting
