How To Load Settings - Furuno FSS-3BB Operator's Manual

1.27.2

How to load settings

Previously saved settings can be loaded from their save location, either internal or ex-
ternal location, at any time.
Note: When the load procedure is complete, previous settings cannot be restored.
Check that the settings to be loaded are correct before starting the procedure.
How to load settings from internal memory
1. Click the [Advanced Settings] icon (
the [Internal Setting] icon (
2. Click the [Load Settings] icon (
3. Click the load slot icon (
ed settings.
How to load settings from an external memory
Note: This method requires connection to an external memory device. If there is no
device connected, the [Load External Unit Settings] icon shown in the procedure be-
low are not available (greyed out).
1. Click the [Advanced Settings] icon (
[Advanced Settings] menu. then click the [External Setting] icon (
external setting save/load icons.
2. Click the [Load External Unit Settings] icon (
able settings files appears.
Note: If there is no external memory connected, the [Load External Unit Settings]
icon is greyed out and not selectable.
3. Select the settings file to load, then click the [OK] button to finish and close the
pop-up.
) to show the internal setting save/load icons.
) to show the load slot icons.
Folder is greyed out if no settings have been
saved to the folder.
- ) that you want to use. The system applies the load-
Select File
) from the InstantAccess bar™, then click
) from the InstantAccess bar™ to show the
). A pop-up window listing the avail-
Cancel
1. OPERATION
1
) to show the
1-35