How To Import, Export Model Data - Furuno FSS-3BB Operator's Manual

2.2.5

How to import, export model data

How to import model data
Follow the procedure below to import model data from an external storage device.
1. Click the [Advanced Settings] icon (
the [Advanced Settings] icon (
2. Click [IDENTI-FISH].
3. Click the
ta] window.
Model data
selection window
FSS-3BB
4. Use the drop-down list to select the external storage device where the model data
to import is saved.
5. From the drop-down list, select the fish species to import.
Fish species information for the fish species stored on the external storage device
appears.
6. Select model data to import. from the model data selection window of the external
storage device. To import all model data, click the [All] button. The message "Se-
lected model data will be deleted. Are you sure?" appears.
7. On the FSS-3BB, select the save destination for the fish species selected.
8. Click the [Import] button. The model data selected at step 6 is also displayed in
the model data field on the FSS-3BB. A confirmation message is displayed in the
following cases. Click the [Yes] button to continue, or the [No] button to cancel.
• The model data was not taken from the installed transducer.
• The model data name is different between the FSS-3BB and the external stor-
age device.
• Model data was recorded on a unit other than the FSS-3BB.
9. Click the [Close] button to close the [Import Reference Data] window.
10. Click the [OK] button to finish.
) to show the [Advanced Settings] window
button at [Import Reference Data] to show the [Import Reference Da-
Select fish specie drop-down list
) from the InstantAccess bar™, then click
Model data
selection window
External storage device
2. GRAPH FUNCTIONS
Select fish specie
drop-down list for
external storage
device
2-9
2