Preparation; Unpacking The Product; Inspecting The Device; Assembling The Product - Storz EasyGO! II Instructions For Use Manual

5 Preparation

5.1 Unpacking the product

1. Carefully remove the product and accessories from the packaging.
2. Check the delivery for missing items and any possible damage.
3. In the case of damage, hidden defects, and short deliveries, document their nature and
extent and contact the manufacturer or supplier immediately.

5.2 Inspecting the device

1. Inspect the device for visible contamination. Do not use if contaminated.
2. Inspect the device for the following characteristics:
– Good working order
– Functionality
– Correct assembly of the components
– Completeness

5.3 Assembling the product

1. Attach the black protection cap to the telescope holder.
2. Turn the fixation screw to open the bar.
Instructions for use • EasyGO! II • UYJ889_EN_V2.0_02-2022_IFU_CE-MDR
Preparation
12