Fancom VLR.6
5. Points of attention
5.1 Analog control
The VLR.6 is set as standard as an 10-0Vdc analog control. When this
control changes into a 0-10Vdc control, jumper J3 should be changed;
see jumper setting. The manual operation connection should also be
changed. This means that the red (RD) and blue (BL) wire should be
changed around.
Fancom advises the following controls with applications, see Table 2.
Table 2: Analog control advice
Application
Fan(s)
Lighting
Heating
Analog control
10-0Vdc
10-0Vdc
0-10Vdc
5
5. Points of attention