Download Print this page

Setting Up - Kanguru Autoloader 100 User Manual

100 target cd duplicator
Hide thumbs


Table of Contents
Kanguru Autoloader 100

3.3 Setting Up

Please use the following instructions to setup your Kanguru Autoloader:
1. Remove all parts from the carton.
3. Attach the sides of the disc hopper by snapping the two sides into place.
4. Attach the base plate to the left side.
2. Place the Reject Bin in the unit
5. Attach the output spindle to the base plate


Table of Contents

  Related Manuals for Kanguru Autoloader 100

  Related Content for Kanguru Autoloader 100

This manual is also suitable for:

Cd duplicator