Kanguru DC-DVDDUPE-S15 Quick Start Manual

Kanguru Daisy Chain DVD Duplicator Quick Start Guide
Kanguru Daisy Chain DVD Duplicators can operate individually as standalone systems. They can also be linked together to create a
system of separate DVD Duplicators working together in unison. As few as two and and as many as 60,000 duplicators can be connected
in a daisy chain configuration. This is a Quick Start Guide for configuring Daisy Chain DVD Duplicators. For detailed information about
your Kanguru DVD Duplicator, please refer to the User Guide. A digital copy of the User Guide can be downloaded from our website
at: support.kanguru.com

Setting up Your Daisy Chain System

1. Unpack all the Daisy Chain Duplicators and arrange them side-by-side on a secure, elevated surface.
It will make the setup process easier if you have access to the back of the duplicators.
○ We'll call the duplicator located furthest to the left (when viewed from the front) Duplicator #1.
Duplicator #1 is the Master tower.
○ The duplicator to the right of Duplicator #1 is Duplicator #2
○ The next duplicator to the right of Duplicator #2 is Duplicator #3, etc...
2. Locate the two daisy chain ports on the back of each Duplicator. All daisy chain ports and daisy chain
connector cables are color coded for convenience. Blue is for sending data out Black is for receiving
data in.
Secure. Anytime. Anywhere.
Models: DC-DVDDUPE-S15
Duplicator #1
(Master Tower)
Blue (Out) Black (In)
Duplicator #2
TM
Duplicator #3