Serial Interfacing Commands; Dport; Mport - Javad HPT102 Operator's Manual

Command Line Interface

Serial Interfacing Commands

DPORT

3.3. Serial Interfacing Commands
3.3.1. DPORT
The DPORT is an object that responsible for data port interface configurations like Bit Rate, Flow
Control, etc.
DPORT [Parameter Name] [Parameters List] [/?]
Parameter Name
RATE
BITS
PARITY
FLOW

3.3.2. MPORT

The MPORT is an object that responsible for maintenance serial port interface configurations
such as data rate and number of bits in a byte.
32
Parameter List
0 – Maintenance Port baud rate, a default setting
1 – 1200 baud
2 – 2400 baud
3 – 4800 baud
4 – 9600 baud
5 – 14400 baud
6 – 19200 baud
7 – 38400 baud
8 – 57600 baud
9 – 115200 baud, a default setting
Set number of bits in one byte (8 or 7)
8 is a default setting
0 – None, a default setting
1 – Odd
2 – Even
0 – None, a default setting
1 – Not used
2 – HW (RTS/CTS)
www.javad.com