Help; Save - Javad HPT102 Operator's Manual

Command Line Interface
Special Commands

HELP

3.4.2. HELP
The HELP command types the list of all available commands:
HELP – Display this usage
BOOT – Reboot the unit
LINK – RF Link Operation Mode
DPORT– Data Port Configuration
MPORT – Maintenance Port Configuration
ALARM – Alarm Indication and Alarm Control Configuration
SLEEP – Sleep Mode Configuration
CONNECT – Connect to Specified Unit
STATE – Display Status and Statistics
SAVE– Save Current Configuration into Configuration File
INFO – Display Product ID along with Hardware/Software Versions
DATAMODE – Exit Maintenance Mode
[COMMAND] /? – Display Command Usage

3.4.3. SAVE

The SAVE command is intended to store the unit's currently used configuration into the User
Configuration file. The configuration stored in the User Configuration file is activated by
automatically after unit's reboot.
34
www.javad.com