Computer Setup And Software Installation For N5252A - Keysight Technologies N5252A User Manual

Computer Setup and Software Installation for N5252A

1. Install the M9005A-002 PCIe desktop adapter into your tower PC expansion slot. For an
example, consult the
similar installation).
2. Connect the supplied interface cable (M9005-61301) to the cable port on the back of the
M9005A chassis (MXI-Express x1), then connect the other end of the cable to the PCIe
desktop adapter connection port on the back of the PC. Consult the
for details.
Software Installation
There are three software items that need to be installed onto your computer:
• Keysight IO Libraries Suite
• Keysight M9005A PXIe Chassis driver software
• Vector Network Analyzer software - Network Analyzer application
1. Keysight IO Libraries Suite - Download and install the
Keysight's website.
2. Keysight M9005A PXIe Chassis drivers - Refer to the Keysight M9005A PXIe Chassis
User Guide (M9005-90001) "Getting Started with the System" section for installation
instructions. The driver software can be installed from the M9005 PXIe Chassis Product
Software and Information CD included with the shipment, or from the
Chassis Driver page
3. Vector Network Analyzer software (Network Analyzer application) - To download your
application firmware, visit the
4. Once the software has been installed, refer to "Turning on Your System" below.
Disable "Sleep Mode" on your PC when running the Network Analyzer
application. Leaving it on will cause the application to crash.
Turning On Your System
Turn on the M9005A chassis first, before turning on your computer.
Turning on the chassis first will normally turn on the system computer by
itself. If not, check the M9005A connections to your computer.
22
Keysight M9048A PCIe Desktop Adapter Installation Guide
on Keysight's website.
Keysight N5252A and N5253E system product
M9005A User Guide
Keysight IO Libraries Suite
M9005 PXIe
N5252-90002 User's Guide
(which is a
from
page.