System Setup For N5252A - Keysight Technologies N5252A User Manual

System Setup for N5252A

The M9374A modules are installed into the M9005A chassis at the factory, with the
interconnects as shown in
(Figure 1) and four modules for Option 400
desktop adapter.
Figure 8 M9005A PXIe Chassis with four M9374A Modules (Option 400)
1. Connect the supplied power cord to the M9005A chassis, but do not apply power until
the system setup is complete.
2. Ensure reference jumper cables, trigger jumper cables, and 50 Ω loads are installed.
The 50 Ω terminator at LO Out on the first slot M9374A will be removed
and used to terminate LO O on VDI Extender #2.
N5252-90002 User's Guide
Figure 7 below. Two modules are installed for Option 200
(Figure 2). N5252A includes a PCIe
17