Table of Contents
Advertisement
2
Connecting Ethernet and Power
Ethernet and Power Connections
Use any RJ-45 to connect the AGS-1024 to an Ethernet-enabled device,
including servers, routers or other switches. No crossover cable is necessary.
The AGS-1024 supports 10/100/1000 Mbps Ethernet; 10/100 Mbps half/
full-duplex mode and 1000 Mbps full-duplex mode.
Use the included power cable to connect the AGS-1024 to a surge protect-
ed outlet. The AC input socket and a power switch are on the rear panel.
The built-in power supply supports 100~240VAC at 50/60Hz.
CAUTION: Use only the correct power cord for your environment.
c
Any voltage other than standard 100/240 will result in
damage to the AGS-1024.
Advertisement
Table of Contents
