Table of Contents
Advertisement
Fade Type
Mode1 Mode2
Autofocus
*
33
Adjustment
52
34
Stopper/Strobe
53
35
Dimmer
54
*
Dimmer Fine
DANGER:Disconnect from the mains before starting any maintenance work.
Ballast
Please change timely when each pin is getting yellow.
Be sure to maintain the device every 2 months,and make sure that all parts of the ballast,such as,scre-
ws,terminals,are locked well to ensure performance.Neglecting of maintenance may lead to failure of
devices.
Lamp
Turn off the lamp first to better protect the device when the fixture is turned off. Turn off the power after
running for at least 5 minutes
Don't touch the bulb with your hands.Once contacting with your hands,scrub with alcohol and then dry
with linen.
When the light is on, the bulb runs at high pressure,so there is a risk of broken.It is related to the duration
of using,temperature and unreasonable operation.Therefore, please do not use lamp over the life span.
The using of lamp should not exceed
time of the fixure regularly.When the lamp is used around 20000 hours, We strongly recommend that you
change the lamp.After replacing it,the used time of lamp can be removed and reset.
Avoid operating in dirty and dusty environment, clean and maintain lamps regularly. Wipe the outside of
the lens at least every 20 days. Wipe the internal fan at least every 30 days
Unused range
autofocus priority BLADE
autofocus priority rotation gobo
autofocus priority Animation
autofocus priority Iris
Close
Shutter Open
Strobe-effect from slow to fast
Shutter Open
Opening pulse in sequences from slow to fast
Closing pulse in sequences from fast to slow
Shutter Open
Random strobe-effect from slow to fast
Shutter Open
Dimmer 0 → 100%
Dimmer Fine
9.Maintance and cleaning
20000
hours, otherwise it can damage device. Check the running
- 20 -
Function
Dmx Value
0-15
16-75
76-135
136-195
196-255
0-31
32-63
64-95
96-127
128-143
144-159
160-191
192-223
224-255
0-255
0-255
Advertisement
Table of Contents
