Table of Contents
Advertisement
It is absolutely essential that the fixture is kept clean and that dust,dirt and smoke fluid residues must not
buildup on or within the fixture. Otherwise, the fixtures light-output will be significantly reduced. Regular
cleaning will not only ensure the maximum light-output, but will also allow the fixture to function reliably
through out its life. A soft lint-free cloth moistened with any good glass cleaning fluid is recommended,
under no circum stances should alcohol or solvents be used!
The front objective lens will require weekly cleaning as smoke-fluid tends to building up residues,reduc-
ing the light-output very quickly.The cooling-fans should be cleaned monthly.
The gobos may be cleaned with a soft brush,The interior of the fixture should be cleaned at least annua-
lly usinga vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the lamp and the fuse.
Please disconnect the power supply before replacing the fuse and bulb. When replacing them, adopt the
same mode.
10.1 Electrical paramters
SOURCE:
1400W White LED
Max POWER:
1700W
VOLTAGE:
AC100-240V 50/60HZ
Color temperature：8300K
10.2 Weight and dimensions
Dimensions：483X336X871
NET WEIGHT:48Kg
Dimensions（Air boxes-
NET WEIGHT/WEIGHT
10.3 Channel Characteristics
1.Channel:54、35DMX-512.
2. Scan: Pan540°,Tilt270°,Scan speed adjustable.Fixture could auto reset.
3.Colour wheel: one open+6colors.half-color effects,CMY+CTO function.
4.Gobo wheel:one open+7 gobos.one , Fix gobo wheel :one open+9gobos+1position dynamic effects.
5 . Prism system:1 rotating of faces.
6. Zoom:linear amplifier.
7. Focus:linear focus with auto function.
8. Demmer:electronic dimming,linear dimmer.
9. Strobe:electronic strobe,with strobe mode of synchronistical,pulse and random.
10. Multi cutting independent control, cutting components with rotation function.
10.Electric equipment specification
mm
1
lights）:489X540X894mm
(
Air boxes-1 lights
- 21 -
)
:45Kg/93Kg
Advertisement
Table of Contents
