Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Jolly X-1400 Wash PF
Summary of Contents for Jolly X-1400 Wash PF
- Page 1 USER MANUAL...
-
Page 3: Table Of Contents
Table of content 1.Open-Package guidelines............... １.１Package....................1 2.Safety instructions..................1 3.Operating determination.................3 4.Rigging the fixture...................4 4.1 Mounting.....................4 4.2Installing the Clamps................4 4.3 Power supply connection and cut off...........6 4.4 Power Connection................6 4.5 DMX-512 connection/connection between fixtures......6 Description of the device............ - Page 4 Congratulations on choosing our products! Please carefully read this instruction manual in its entirety and keep it well for using reference. This manual contained about the installation and the relative using information of this products. Plese refere this manual's relative instruction when using this equipment.
-
Page 5: Open-Package Guidelines
1.Open-Package guidelines This equipment is made of new style,high intensity plastic.It fully shows the modem times light charac teris- tic with teristic with beauty struture. And it is made accord to CE standard. Fully agree with the internation standard of DMX 512 agreement. - Page 6 Never let the power-cord come into contact with other cables! Handle the power cord and all connections with particular caution! Make sure that the available voltage is not higher than stated on the rearpanel. Always plug in the power plug least. Make suer that the power-switch is set to off-position before you con ections with themains with particular caution! Make sure that the power-cord is never crimped or damaged by sharp edges.Check the decice and the p- ower-cord from time to time.
-
Page 7: Operating Determination
lines of the projectors from indirect contact and/orshorting to earth by using appropriately sized residual current devices. Disposing This product is supplied in compliance with European Directive 2012/19/EU-Waste Electrical and Electronic Equipment (WEEE). To preserve the environment please dispose/recycde this product at the end of its life according to the local regulation. -
Page 8: Rigging The Fixture
4.Rigging the fixture 4.1 Mounting Pay attention to the regulations of CE. Installation by qualified staff to complete. For the various mounting positions of the FIXTURE(standing on the floor, sideways or hanging different accessories kits are available. Through this a safe and firm installation is assured. You’ll find special connectors on the bottom side of the system which are put to use here. - Page 9 The projector can be placed directly on the stage floor or rigged in any orientation on atruss without alte- ring its operation characteristics. For overhead use,always install a safety-rope that can hold at least 10 times the weight of the fixture.You must only use safety-ropes with screw on carabines.Pull the safety-rope through the two apertures on the bottom of the base and over the trussing system etc.
-
Page 10: Power Supply Connection And Cut Off
4.3 Power supply connection and cut off Connect the light source to the main power source with the plug of the power cord, or cut off the power supply: Connection: according to procedures, the power plug and socket is inserted into the groove one one alignment,rotation. -
Page 11: Description Of The Device
DMX Terminator Diagram -For installations where the DMX cable has to run a long distance or is In an electrically noisy environment it is recommended to use a DMX terminator. This help in preventing corruption of the signal by electrical noise. The DMX terminato r is simply an XLR plug witha Ω... -
Page 12: Dimension
6.Dimension 603mm (23.74”) 640mm (25.20”) 483mm 372mm (19.02”) (14.65”) 194mm (7.64”) 815mm (32.09”) 480mm (18.90”) 483mm 372mm (19.02”) (14.65”) - 8 -... -
Page 13: Display Control
7.Display control 7.1 Navigation in the Menu Using the buttons or touch screen, and this can be simply and easily set the address code and functions code. If you view or modify the lighting feature set, then press ENTER button, the display will enter the menu interface. - Page 14 Click on the main interface of the icon, numerical to view view Settings related information of lamps and lanterns.Symbols such as the main interface appear “ “,the following error message indicates that there might be a lamps and lanterns,can click to view and control information content to modify the lamps and lanterns.
-
Page 15: Menu Maps
7.3 Menu Maps Remark Dmx Address 001~XXX Dmx Address Mode1 1~18 Set up Channel Mode Default Mode1 Mode2 1~24 Mode3 1~25 Fixture Id 0001~9999 Lamps address(Password:1702) Fixture Times XXXXX h XX m Total working hours Lamp On Times XXXXh XXm Lamp On working hours Lamp Times Lamp Strike XXXX... -
Page 16: Dmx Protocol
8.DMX protocol Mode1 Mode2 Mode3 Name Function DMX Value Shutter closed (Lamp switches to 800 watt mode 0-19 after shutter is closed for 10 seconds) Shutter open 20-49 Shutter/Strobe Strobe slow to fast 50-200 Shutter open 201-210 Random Strobe slow to fast 211-255 Dimmer closed→open... - Page 17 Mode1 Mode2 Mode3 Name Function DMX Value — — Blade UP 1 Blade moves linearly into the light beam 0-255 — — Blade UP 2 Blade moves linearly into the light beam 0-255 — — Blade DOWN 1 Blade moves linearly into the light beam 0-255 —...
-
Page 18: Maintance And Cleaning
Time table BIT Seconds Seconds BIT Seconds BIT Seconds BIT Seconds Seconds Full 10.2 10.4 10.6 Full 9.Maintance and cleaning DANGER:Disconnect from the mains before starting any maintenance work. Ballast Please change timely when each pin is getting yellow. Be sure to maintain the device every 2 months,and make sure that all parts of the ballast,such as,scre- ws,terminals,are locked well to ensure performance.Neglecting of maintenance may lead to failure of devices. -
Page 19: Electric Equipment Specification
The using of lamp should not exceed 1500 hours, otherwise it can damage device. Check the running time of the fixure regularly.When the lamp is used around 1500 hours, We strongly recommend that you change the lamp.After replacing it,the used time of lamp can be removed and reset. Avoid operating in dirty and dusty environment, clean and maintain lamps regularly. -
Page 20: Menu Function
10.4 Menu Function 1.Touch screen，English/Chinese menu. 2.Each DMX Value displayable. 3.Time of automatic turning off is able to set on the display, when operating pan/tilt , Color and gobos,strobe are turn off and able to set freely. 4.Display the time using of lighting feature and lamp as well as the times of turning on for lamp. 5.With function of turn on lamp when powered. -
Page 21: Color Wheel
10.6 Color wheel 1.Red 7.Deep blue 2.Blue 6.Deep Orange 3.Green 5.Light orange 4.Light green - 17 -... -
Page 22: Electronic Drawing
11.Electronic drawing (ZO) (FO) Framing Rotation Motor Cyan Yellow Magnta Shutter strobe Motor Driver Board 1 Magnta 90Fan Note: The above contents for reference only and is subject to change without prior notice, please take specification you have on hand and our company reserves the final right of interpretation. - 18 -... - Page 26 ht tp: //www.jol lyl ight ing. com Guangzhou hongcai stage equipment Co.,Ltd Tel:+862084558833 Fax:+862084559699 Email:info@jollylighting.com P.C:511450 Add:Building2,No.32,Changsha Street,Shachong Village,shiji Tow.Panyu District,Guangzhou,China...