Table of Contents
Advertisement
Mode 1 Mode 2
1
1
2
2
3
3
4
4
5
6
DANGER:Disconnect from the mains before starting any maintenance work.
It is absolutely essential that the fixture is kept clean and that dust,dirt and smoke fluid residues must not
buildup on or within the fixture. Otherwise, the fixtures light-output will be significantly reduced. Regular
cleaning will not only ensure the maximum light-output, but will also allow the fixture to function reliably
through out its life. A soft lint-free cloth moistened with any good glass cleaning fluid is recommended,
under no circum stances should alcohol or solvents be used!
The front objective lens will require weekly cleaning as smoke-fluid tends to building up residues,reduc-
ing the light-output very quickly.The cooling-fans should be cleaned monthly.
The gobos may be cleaned with a soft brush,The interior of the fixture should be cleaned at least annua-
lly usinga vacuum-cleaner or an air-jet.
Maintenance and maintenance of the operation, please contact the manufacturer or distributor.
8.DMX protocol
Fade Type
Function
Dimmer
Dimmer 0-100%
Dimmer Fine
Dimmer Fine 0-100%
No function (shutter Close)
Strobe effect slow to fast
No function (shutter open)
Strobe
Pulse-effect in sequences
No function (shutter open)
Random strobe effect slow to fast
No function (shutter open)
Linear CTO
5200-2500K
No function
5000
4500
4200
Fixed CTO
3900
3600
3300
3000
2700
No function
linear
gamma1.5
Dimming curve
gamma1.0
curve s
No function
9.Maintance and cleaning
- 10 -
Dmx Value
0-255
0-255
0
1-95
96-127
128-159
160-191
192-223
224-255
0-255
0-15
16-45
46-75
76-105
106-135
136-165
166-195
196-225
226-255
0-9
10-19
20-29
30-39
40-49
50-255
Advertisement
Table of Contents
