JX2-IO16
6.3
Caution
Jetter AG
Notes on Safety as regards
Commissioning
Danger resulting from electric shock!
If the JX2-IO16 module is not isolated from the mains, for example during
commissioning, you can get an electric shock.
Please observe the following precautions in order to avoid injuries such as
muscle cramps, and damages to the module:
Have works on the electric and electronic system performed by
qualified personnel only. For information refer to chapter 1.1.3 "Who is
Permitted to Operate the JX2-IO16 Module?", page 12.
Prior to commissioning, please do the following:
Reattach dismantled protective equipment and check it for proper
functioning.
This way, protection from moving parts of the machine will be achieved.
Connect only devices or electrical components to the signal lines of the
JX2-IO16 module that have been sufficiently isolated from the
connected electric circuits;
Protect the JX2-IO16 module and the equipment connected to it
against accidental contact with live parts and components;
Always carry out each commissioning, even a short functional test, with
correctly connected PE bus;
Ensure a durable connection between controller, module and
expansion modules connected to it.
6.3 Notes on Safety as regards Commissioning
35