Table of Contents
Advertisement
JX2-IO16
1
Table
Contents
of
1.1
The JX2-IO16 module complies with the safety regulations and standards in effect.
Special emphasis was given to the safety of the users.
Of course, the user should adhere to the following rules and regulations:
•
•
•
1.1.1
Usage as agreed upon includes operation in accordance with the operating
instructions.
The JX2-IO16 module is a peripheral module featuring 8 digital inputs and 8 digital
outputs and can be connected to the Jetter system bus.
The supply voltage of the JX2-IO16 module is DC 24 V. This operating voltage is
classified as SELV (Safety Extra Low Voltage). The JX2-IO16 module is therefore
not subject to the EU Low Voltage Directive.
Up to three non-intelligent JX2-IO modules can be connected to a JX2-IO16 module
not requiring a power supply of their own.
Sensors and connectors connected to a JX2-IO16 module are supplied with DC 24
V by the module.
The JX2-IO16 module may only be operated within the limits of the stated data (for
more information refer to chapter 5 "Technical Data", page 29).
Do not apply a voltage to the JX2-IO16 module that is higher than the specified
operating voltage.
The JX2-IO16 module is used to control machinery, such as conveyors, production
machines, and handling machines.
1.1.2
The JX2-IO16 module must not be used in technical systems which to a high
degree have to be fail-safe, e.g. ropeways and aeroplanes.
If the JX2-IO16 module is to be run under ambient conditions, which differ from the
conditions mentioned in chapter 4 "Operating Conditions", page 25, the
manufacturer is to be contacted beforehand.
Jetter AG
Safety Instructions
Generally Valid Safety Instructions
relevant accident prevention regulations;
accepted safety rules;
EC guidelines and other country-specific regulations.
Usage as Agreed Upon
Usage Other Than Agreed Upon
1.1 Generally Valid Safety Instructions
11
Advertisement
Table of Contents
