Table of Contents
Advertisement
MXV 450
4. Right coil
5. Right spark plug
6. Engine temperature sensor
7. Throttle position sensor (TPS)
8. Crankshaft revolution/timing sensor
9. Intake air temperature sensor
10.ECU
11.Left injector
12.Left coil
13.Left spark plug
14.Stepper motor
15.Voltage regulator
16.Condenser
Electrical system installation
Central part
The filter housing has been redesigned with the aim of centralising the ground connections and housing
delicate electrical components like:
•
Injection Ignition ECU
•
Stick-type coils
•
Condenser
•
Air temperature sensor
•
Voltage regulator (external)
•
Electrical wiring
For this reason, while fitting be careful with the possible interferences between the cable harness and
the moving parts such as throttle control cable and throttle body levers.
Throttle control cables are prefitted on the throttle
body.
Once the throttle body has been removed from the
filter housing, link the main cable harness to the
Stepper motor, to the throttle valve sensor, to the
right injector, to the capacitor and to the intake air
temperature sensor.
Electrical system
ELE SYS - 47
Advertisement
Table of Contents
