MXV 450
6 - Ground connection
7 - Motorcycle (reprogramming)
8 - Motorcycle (data / diagnosis reading)
9 - PC RS-232
The motorcycle is supplied with a CD-Rom that contains control unit interface self-installing software
plus connection cable (5).
If the notebook in use does not feature an RS-232 serial port, connection is possible by purchasing the
specific adaptor.
10 - Cable
11 - Multiple connector
12 - Battery
Use cable (10) to start the engine under critical conditions or to self-diagnosis the injection ECU via
AXONE with the vehicle off.
Replace the key.
The diode protects the control unit if cable (10) is wrongly connected to the battery terminals (12) (in-
verted poles).
Injection
Power supply
P SUPP - 161