Table of Contents
Advertisement
MXV 450
Electrical system
Coils (4) and (5) are so placed that the connector
is suitably positioned.
Clamp (6) locks the left coil supply cable.
The main cable harness must also be secured ex-
ternally by locking it to the filter housing with clamp
(7) on the left side.
The connectors of both current generator and rev-
olution/timing sensor are protected by a rubber
cover (8) and inserted under the filter housing be-
tween the front and rear heads.
ELE SYS - 49
Advertisement
Table of Contents
