Table of Contents
Advertisement
3
Technical specification
Manufacturer:
Address:
Type:
Power supply:
Power consumption:
Auxiliary voltage:
Internal control fuse:
Door width:
Electro-mechanical locking
device:
Door weight:
Door opening angle:
Opening time (0° - 80°):
Closing time (90° - 10°):
HOLD open time:
Ambient temperature:
Relative humidity:
Drive unit weight:
This product is to be installed internally.
Class of protection IP 20.
Complies with: ANSI/BHMA A156.19, ANSI/BHMA A156.10, UL 325, UL 991, UL 244A, UL 1310, CAN/CSA-C22.2
N0 223-M91 and CAN/CSA-C22.2 N0 247-92
Approvals:
3.1
Opening times
Opening time is adjustable from 2-12 seconds and dependent on the weight, width and installed
arm system of the door. For max opening times on low energy doors, see Table I on page 79.
1009937-EI-1.0
ASSA ABLOY Entrance Systems US Inc.
1900 Airport Road, Monroe, NC 28110, US
Besam SW200i
120 V AC +10/-15%, 50/60 Hz
max. 300 W
24 V DC, max. 700 mA
2 x T 6,3 AH 250 V
36-48" (914-1219 mm)
Selectable: 12V DC, max. 1200 mA / 24 V DC, max. 600 mA
Surface Applied, SA: 100-700 lb. (45-315 kg)
Overhead Concealed, OHC: 100-350 lb. (45-160 kg)
PUSH: 80° - 110°, with reveal 0 - 12" (0 - 305 mm)
PULL: 80° - 110°, with reveal 0 - 5 1/8" (0 - 130 mm)
PAS: only 80°-95°, with reveal 0 - 5 1/8" (0 - 130 mm)
80°-95° in a concealed application
variable between 2 - 12 seconds
variable between 4 - 12 seconds
1,5-30 seconds
-4 °F to +113 °F (-20 °C to +45 °C)
Max. 95%
19,8 lb. (9 kg)
Third party approvals from established certification organizations valid for
safety in use and escape route safety. For details see Declaration of Conformity.
Issue 2013-02-10
3 Technical specification
7
Advertisement
Table of Contents
