Models - Besam SW200i Installation And Service Manual

5

Models

The Besam SW200i operator can be installed overhead concealed or surface mounted. These two
versions can be used in the following installations:
• Single doors
• Double doors (two operators)
5.1 Concealed mounted
The concealed operator is used to control a center-pivot door, with the operator integrated and
concealed in the header above the door. The door can be opened in a direction opposite to normal
in an emergency (panic breakout). Manual reset by pushing the door back into normal operation
sector is necessary.
A concealed operator can also be installed in the ceiling space above the door (bottom load). Such
applications may require field engineering of components and hardware.
Operator for right handed door
Operator for left and right handed door
1009937-EI-1.0 Issue 2013-02-10
5 Models
13