GVM -680RS Manual page 17

PENGENALAN PRODUK
Scan the QR code on the back of the manual to download the APP
Turn on the video light and set the mode to APP mode. Open the "GVM LED"
application software on the phone ( The phone needs to turn on bluetooth and
→
GPS), then enter the bluetooth's search interface Find the bluetooth
→ →
named "BT_LED" and connect Wait for connection After connect
success, it will automatically enter the app's control interface. At this time, the
video light have been connected and you can controll the APP.
You can save 6 custom light effects in "My Scenes". After setting the light
→ →
effect parameters click the " " icon in the right corner pop up the
→
"Save Current Scenes" click "OK". This light effect can be found in "My
Scenes" at this time.
If there is a slave, the APP will synchronously control the slave of the same
channel as the connected APP mode machine.
Color temperature RGB control Scene light Save light
control interface interface control interface effect interface
15