Connecting A Single Camera To A Switcher, Recorder, Or Monitor; Connecting A Single Camera To A Computer; Connecting A Single Camera To A Single Remote Controller (Not Supplied) - Sony SRG-X40UH Operating Instructions Manual

Connecting a single camera to a
switcher, recorder, or monitor
Devices equipped with an HDMI input terminal
Video monitor
Connecting a single camera to a
computer
Computer
HDMI cable (not supplied)
To HDMI input terminal
USB cable (not supplied)
To USB terminal
Connecting a single camera to a
single remote controller (not
supplied)
Select either VISCA over IP or VISCA RS-422 with
the remote controller. For details, see the
operating instructions of the remote controller.
Using VISCA over IP (LAN terminal)
Network cable
(commercially available)
Connecting a single camera to a remote
controller directly
* Use a cross network cable.
Using the VISCA RS-422 terminal
A remote controller can be connected via the
VISCA RS-422 terminal. The VISCA RS-422 allows
connections of up to 1.2 km in length.
* Use straight network cable.
19
To LAN terminal
Network cable (commercially
available)