Table of Contents
Advertisement
Precautions for Preventing
Access to the Camera by an
Unintended Third Party
The camera settings may be changed by an
unintended third party on the network,
depending on the usage environment.
The camera can be fraudulently accessed in a
network environment where a device is
connected or connectable to the network
without the administrator's permission, or where
a computer or other network device connected
to the network can be used without any
permission.
After configuring the camera, immediately
change the password you use for upgrading the
firmware on the camera, from a Web browser on
your computer, and for changing settings. For
how to change password, see "Changing the
Initial Password" (page 43).
Features
Pan/Tilt/Zoom CMOS video camera
equipped with a small built-in pan-tilt
head
• The camera unit is equipped with a 1/2.5-type
Exmor R CMOS sensor and a 20× optical zoom
lens with pan/tilt features integrated into a
small built-in pan-tilt head. This versatile
camera can be used for various applications.
• The pan-tilt head can pan to the right or left by
170 degrees and tilt upward to 90 degrees and
downward to 20 degrees, which allows the
camera to remotely shoot wide areas.
• The camera pans and tilts at a speed of
between 0.5 and 101 degrees (maximum
speed) per second, and it also pans and tilts at
a maximum speed of 300 degrees per second
in the preset operation.
Zoom performance for capturing distant
subjects
For SRG-X40UH/H40UH, in addition to 20×
optical zoom, Sony's 2×* Clear Image Zoom
function is also used to achieve the equivalent of
up to 40x optical telephoto zoom. Moreover,
using digital zoom together with this achieves
the equivalent of up to 240x telephoto zoom.
Video output
The camera is equipped with HDMI and USB
output.
For details, see the table of "Video output
format/Frame rate" (page 52).
Preset function
Up to 100 presets can be stored in the VISCA
command.
Equipped with RS-422 interface
The camera is equipped with RS-422 interface
which is the industry standard VISCA camera
protocol in external communication.
Equipped with PoE+ (Power over
Ethernet Plus)
The camera supports IEEE802.3at-compatible
PoE+ (Power over Ethernet Plus) and a single LAN
cable is used for power supply and control.
Compatible with VISCA over IP protocol
An IP connection can be established between
the camera and the remote controller.
* Only when shooting in less than HD.
5
Advertisement
Table of Contents
