Connecting To A Monitor Or A Tv - Sony NXCAM HXR-NX80 Operating Manual

Connecting to a monitor or a TV

Playback image quality depends on the type of monitor or TV, and the jacks used to make the
connection.
b Notes
• Video signals cannot be output from the output jacks above simultaneously.
• The output resolution of VIDEO OUT is 480i when [60i] is selected, and 576i when [50i] is selected.
• It is recommended that you use an authorized cable with HDMI logo or a Sony HDMI cable.
• Images are not output from the HDMI OUT jack of your camcorder, if copyright protection signals are
recorded in the movies.
• Images and sounds may not be reproduced correctly on some monitors or TVs.
• When the frame rate in [REC FORMAT] is set to 24p or 30p (when [60i] is selected) or 25p (when [50i]
is selected), the output signal is converted to interlace or progressive through pull-down conversion.
• Do not connect the output jacks of the camcorder with the output jacks of the monitor or TV. A
malfunction may be caused.
HDMI cable (sold separately)
AV cable (sold separately)
Monitor/TV
To HDMI input
jack
Signal flow
Monitor/TV
To video input
jack
To audio input
jack
Signal flow
Continued ,
69