Connecting The Camera; Connecting To An Ac Power Supply - Sony SRG-X40UH Operating Instructions Manual

HDMI cable fixing plate
Note
Do not attach the HDMI cable on the camera,
if you do not use it.
7
Adjust the image flip function to optimize
the ceiling mounting status.
Note
All preset settings will return to their default
settings when changing the setting of the
image flip function. When setting, make sure
to set the image flip function before the
preset settings.
How to remove the camera
1
Remove the 3 screws used to attach the
camera in step 5 of "How to install the
camera".
2
While pushing the entire camera up
towards the ceiling, move the camera to the
front.
The hooks will disengage, and you can
remove the camera.
M 2.6 × 6 (supplied)
Banding band
17

Connecting the Camera

Connecting to an AC power supply

Connect the camera to an AC outlet using the
supplied AC adapter and power cord.
To power supply
AC adapter
(supplied)
1
Connect the supplied AC adapter and
power cord.