Symptom
The image is not displayed
on the computer screen that
is connected.
Items Stored in the Preset
Items stored in the preset are shown in the following lists.
Item stored in the preset
: Stores settings by preset.
: Applies the settings to the camera at the next start-up when they are stored in Preset 1. Preset recall
does not apply the settings.
Pan/Tilt/Zoom/Focus Settings
Item name on the OSD menu
-
RAMP CURVE
ZOOM MODE
-
FOCUS MODE
-
-
-
-
Camera Settings
Item name on the OSD menu
EXPOSURE MODE
IRIS
GAIN
GAIN LIMIT
GAIN POINT
POSITION
-
SPEED
MAX SPEED
MIN SPEED
SLOW SHUTTER On/Off
EX-COMP On/Off
EX-COMP LEVEL
Cause
The USB cable is not connected properly.
An authenticated USB cable is not being
used.
―
A video format that cannot be output via
USB is selected.
Items other than the OSD/
Administrator menu
Pan-Tilt position
-
-
Zoom position
-
Focus position
Auto focus mode
Auto focus interval
Auto focus sensitivity
Items other than the OSD/
Administrator menu
-
-
-
-
-
-
High-sensitivity Mode
-
-
-
-
-
-
Remedy
Check that the unit and the computer are
connected.
Use an authenticated USB cable.
Disconnect the USB cable from the computer,
then reconnect it again.
Select the proper video format.
47
Item stored in the preset
Item stored in the preset