Korg Karma Parameter Manual page 267

File is read-only protected
Meaning: You attempted to write to a file or to delete a file
that had a read-only attribute.
Meaning: You attempted to save a file to a floppy disk that
contained a read-only file of the same name.
Action: Save the file with a different name.
File unavailable
Meaning: You attempted to load or open a file whose format
was incorrect.
File/path not found
Meaning: When executing the Disk mode utility menu com-
mand "Delete," the specified file did not exist.
Meaning: When executing the Disk mode utility menu com-
mand "Copy" and you used a wild card to specify
the copy file name, the specified file was not
found. Alternatively, the length of the copy source
path name exceeded 76 characters.
Meaning: In Disk mode when you used the [F6] ("Open")
key to open a directory, the path length including
the selected directory name exceeded 76 charac-
ters.
Action: Check the file or directory.
I
Illegal file description
Meaning: The filename that you specified when saving a file
or creating a directory contained invalid charac-
ters.
Action: Change the filename you are specifying. Filena-
mes not permitted by MS-DOS cannot be used as
a filename.
Illegal SMF data
Meaning: You attempted to load a file that was not a Stan-
dard MIDI File.
Illegal SMF division
Meaning: You attempted to load a Standard MIDI File that
was timecode-based.
Illegal SMF format
Meaning: You attempted to load a Standard MIDI File of a
format other than 0 or 1.
M
Master Track can't be recorded alone
Meaning: When realtime-recording a single track, you
attempted to begin recording with the master
track as the current track.
Action: Begin recording with a track 1–16.
Measure size over limit
Meaning: When loading a Standard MIDI File, the number
of events in a measure exceeded the maximum
(approximately 10,000 events).
Meaning: The attempted edit operation would cause the
maximum number of events in a measure
(approximately 10,000) to be exceeded.
Action: Use event editing etc. to delete unwanted data.
Measure number over limit
Meaning: The attempted edit operation would cause the
track length to exceed 999 measures.
Action: Delete unnecessary measures.
Medium changed
Meaning: When executing the Disk mode Utility command
"Copy," the media was exchanged or ejected, and
it was not possible to copy between separate
media on the same drive.
Medium write protected
Meaning: The floppy disk or other media to which you
attempted to save is write-protected.
Action: Turn off write protect on the floppy disk and exe-
cute the command once again.
Memory full
Meaning: In Sequencer mode when editing a song, track or
pattern, the total data of all songs has used up all
of the sequence data memory, and further editing
is not possible.
Action: Delete other song data etc. to increase the amount
of free memory.
Meaning: While realtime recording in Sequencer mode,
there is no more free memory to accommodate the
recorded data, so recording has been forcibly
halted.
Action: Delete other song data etc. to increase the amount
of free memory.
Meaning: In Disk mode when loading a Standard MIDI File,
the sequence memory has filled up.
Action: Delete song data. (If necessary, save the data
before deleting it.)
Memory overflow
Meaning: In Disk mode when using "Save Exclusive" to
receive exclusive data, the sequence memory has
filled up.
Action: If you are receiving two or more sets of exclusive
data, transmit them separately to this instrument.
Memory protected
Meaning: The internal program, combination, song, or
drum kit is protected.
Action: In Global mode, turn off write-protect, and exe-
cute the write or load operation once again.
N
No data
Meaning: When loading a Standard MIDI File, the file con-
tained no events.
No medium
Meaning: When executing a command in Disk mode, no
floppy disk was inserted in the drive.
Action: Insert media such as a floppy disk.
257