Controlling The Master Effects Via Midi; Master Eq; Individual Outputs - Korg Karma Parameter Manual

4. Controlling the Master Effects via
MIDI
You can use the Dynamic Modulation (Dmod) function to
control all Master Effects parameters in real-time from this
instrument's controllers or from an external MIDI sequencer.
In Program mode, the parameters are controlled on MIDI
Global channel "MIDI Channel" (GLOBAL 2.1–1a).
In Combination mode, Sequencer mode, and Song Play
mode, you can set the control channels for MFX1 and MFX2
using the Setup page "Control Channel" parameters of the
"MFX1–2" tabs. Select the desired option from Ch01–16, and
Gch.
Ch01–16: Select this option if you wish to control the param-
eters for each Master Effect on different channels.
Gch: Select this option if you wish to control the parameters
on MIDI Global channel "MIDI Channel" (GLOBAL 2.1–1a).
This is the normal setting.
Program mode
Effect / Mixer Block Diagram in Program Mode
IFX / Indiv.Out
BUS Select
Pan
Oscillator 1
BUS Select
= IFX1
Oscillator 2
Select from:
L/R
IFX1
IFX2
IFX3
IFX4
IFX5
1
2
1/2
Off
166
7.2: Insert Effect
Post IFX
Chain Insert Effects Pan(CC#8)
stereo
IFX1
IFX1 BUS

stereo
IFX2
IFX2 BUS

stereo
IFX3
IFX3 BUS

stereo
IFX4
IFX4 BUS

stereo
IFX5
IFX5 BUS
mono x 2

Master EQ

The Master EQ (stereo, three-band EQ) is located right
before AUDIO OUTPUT (MAIN) L/MONO, R. Low and
High EQs are of the shelving type, and Mid EQ is a peaking
type equalizer. You can control the Low Gain and High Gain
parameters using the Dynamic Modulation function.
The Master EQ (stereo, three-band EQ) is applied to the sig-
nal input from the L/R bus. For more information on the
parameters, p.220.

Individual Outputs

This instrument is equipped with two individual AUDIO
OUTPUTs (INDIVIDUALs). You can route the oscillator
(Program), timbre (Combination), and track (Sequencer and
Song Play) output or the post-IFX signals to these two indi-
vidual outputs.
Use "BUS Select" (7.1–1a) in Program, Combination,
Sequencer, or Song Play mode to route the oscillators (Pro-
gram), timbres (Combination), or tracks (Sequencer and
Song Play) to AUDIO OUTPUTs (INDIVIDUAL).
If you are using the Insert Effects, use "BUS Select" of the
7.2: Ed–InsertFX (or Insert FX), and Setup page to route the
post-IFX signals.
1, 2: Monaural signals are routed to AUDIO OUTPUTs
(INDIVIDUAL).
1/2: Stereo signals are routed to AUDIO OUTPUTs (INDI-
VIDUAL).
Send1 Send2
Post IFX
BUS Select Send1 / 2
BUS Select
= L/R
Select from: Chain Master Effects
L/R
1
MFX1
mono
2
1/2
Off
MFX2
mono
mono x 2
7.3: Master Effect
L/R BUS
AUDIO OUTPUT
Master EQ
stereo
(MAIN) L/Mono, R
Return1 / 2
stereo
stereo
AUDIO OUTPUT
(INDIVIDUAL)1/2