Parameters - Korg Karma Parameter Manual

Parameters

For details on the parameters, refer to the "EXB-MOSS
owner's manual" included with the EXB-MOSS.
Parameter names given in the "EXB-MOSS owner's man-
ual" are the names used when the EXB-MOSS is installed in
the TRITON/TRITONpro/TRITONproX, and will differ
from the names when it is installed in this instrument. How-
ever, the content of the explanations will remain the same.
Viewing the parameters
This manual provides the following information on the
parameters.
• KARMA Parameters (p.276–p.287)
This shows the correspondence between this instrument
parameter names and the parameter names printed in
the "EXB-MOSS owner's manual." Use the following
procedure to find the explanation for a parameter.
1 In the LCD screen of this instrument, find the parameter
that you wish to learn about.
As an example, let's suppose that you want to learn
about the PROG 2.1: Ed-Basic, Prog Basic page "Mode"
parameter.
2 In the index of this manual, find the mode name and
page number shown in the LCD screen.
"Mode" →PROG 2.1: Ed-Basic →p. 291 of this manual
p.276 of this manual, "KARMA Parameters"
PROG 2.1: Ed–Basic
2.1–1: Basic (Prog Basic)
3
This is the reference page in
"Parameter guide" of this instrument.
Please refer to this instrument's
"Parameter Guide" in conjunction with
the "EXB-MOSS owner's manual.
p.288 of this manual, "EXB-MOSS Parameter Index"
3
Release (Release Time)
Amp EG: Time ................................................... 5.1–3: AmpEG: L p.285
EG1...4: Time .................................................... 5.2–1...4: EG1...4: L p.285
Reso
Reed Model: Bell Character .............................. 2.3–1: Reed: Bell p.281
Reso (Resonance)
Resonance: BPF Parameters ........................... 2.3–2: Resonance: BPF BPF: 1...4 p.279
Resonance
Filter: Filter A ..................................................... 4.1–1/3: Filter1/2: Reso to A/B p.284
Noise Generator ............................................... 2.1–3: Noise Gen. p.276
Brass Model: Lip Character ............................ 2.3–1: Brass: Lip p.281
Retrigger (Retrigger Control)
Prog Basic: Voice Assign Mode ........................ 2.1–1: Prog Basic: Voice Assign p.276
Rl (Release Time AMS2 Intensity)
Amp EG: Time Modulation ................................ 5.1–3: AmpEG: T Mod.: R p.285
EG1...4: Time Modulation ................................. 5.2–1...4: EG1...EG4: T Mod.: R p.285
Rosin
Bowed String Model: Bow Speed ...................... 2.3–2: Bowed String: Bow: Bow Speed p.283
Routing
Filter: Routing .................................................... 4.1–1/3: Filter1/2 p.284
3 Find the desired parameter using this instrument's LCD
screen and the LCD screen, mode name, and page num-
ber listed in this manual.
(See the solid lines with arrows in the diagram below.)
4 Use the reference page and parameter name listed beside
the desired parameter name to find the relevant location
in the "EXB-MOSS owner's manual." (See the solid lines
with arrows in the diagram below.)
• EXB-MOSS Parameter Index (p.288–p.291)
You can perform a reverse-lookup to see which this
instrument screen contains a parameter described in the
"EXB-MOSS owner's manual." Use the following proce-
dure.
1 In the "EXB-MOSS owner's manual," find the parameter
name that you want to look up.
2 Use the page number and parameter name to find the
parameter name in the EXB-MOSS Parameter Index. (See
the dashed lines with arrows in the diagram below.)
3 Use the reference page and parameter name listed beside
the desired parameter name to find this instrument
parameter name listed in this instrument Parameters.
Reference page in
KARMA "EXB-MOSS owner's
parameter name manual"
p.
KARMA EXB-MOSS
OSC 1/OSC 2 p.12 1–1a: Multi OSC Setup: OSC 1 (Oscillator 1 Type)/OSC 2 (Oscillator 2
Type)
Sub p.14 1–2c: Sub OSC: Waveform
Mode p.12 1–1c: Voice Assign Mode: Poly, Mono
Hold p.13 1–1c: Voice Assign Mode: Hold
Priority p.13 1–1c: Voice Assign Mode: Priority
Retrigger p.12 1–1c: Voice Assign Mode: Retrigger (Retrigger Control)
Threshold p.12 1–1c: Voice Assign Mode: Threshold (Retrigger Control Threshold)
Type p.13 1–1d: Scale: Type (Scale Type)
GLOBAL 3.1–1a: User Octave Scale (PG p.140), GLOBAL
3.1–2b: User All Notes Scale (PG p.141)
Key p.13 1–1d: Scale: Key (Scale Key)
Random p.13 1–1d: Scale: Random
Page 12 of the "EXB-MOSS owner's manual" included with EXB-MOSS
1–1a: Multi OSC Setup
Here, you can make settings for the oscillator.
The parameters that are set in "1–3: OSC 1" and "1–4:
OSC 2" will differ depending on the oscillator type
that is selected here. (Link: 1–2a, 1–2b)
OSC 1 (Oscillator 1 Type)
[Standard...Bowed String Model]
Selects the oscillator type for oscillator 1.
For details on the oscillator types, refer to "Features of
the oscillator" on p. 4 of this manual.
Single Size
2 Standard
Comb Filter
VPM (Variable Phase Moulation)
Resonance
Ring Modulation
Cross Modulation
Sync Modulation
Organ Model
E. Piano Model
Double Size
Brass Model
Parameter name printed in
"EXB-MOSS owner's manual"
Detune
Detunes the notes that are sounded simultaneously by
the Unison function.
1–1c: Voice Assign Mode
Here, you can specify how notes will sound when
keys are pressed.
Poly, Mono (Single, Multi)
Selects whether the sound will be played monophoni-
cally or polyphonically.
Poly: Polyphonic playing
Mono (Single): Single-triggered monophonic playing
Mono (Multi): Multi-triggered monophonic playing.
When Poly is selected, the Retrigger Control
and Threshold parameters will be unavailable.
Retrigger (Retrigger Contol)
"Retrigger" refers to the action of resetting the EG and
1
LFO at the time of note-on (the EG will return to its
start level, and the LFO will return to the beginning of
the cycle of its waveform). Here you can select the
controller which will specify whether or not the sound
will be retriggered when a note-on occurs.
4
[0...99]
[Off...MIDI:CC#83]
275