Assigning Titles To An Md - JVC NX-MD1 Instructions Manual

Assigning Titles to an MD

You can assign a name to each MD, to each group and to
each track using alphabetic characters (uppercase and
lowercase), symbols and numerals. Once a title is assigned,
it is displayed for your confirmation.
• You cannot edit titles composed of more than 61
characters.
In the following example, the process is explained from the
very first—that is, inserting a disc. If you have already
started recording or playing, start from step 2 .
• When you want to assign a name to each group, press
GROUP to turn on the GROUP indicator.
• You cannot assign a name during playback in MD
Program or MD Random play mode.
• To exit from the title entry screen any time during the
process, press MD TITLE/EDIT.
1
Insert an MD you want to edit into the MD loading
slot while the unit is turned on.
2
Enter into the title entry mode.
• For the disc title or the track title:
Press MD TITLE/EDIT.
Disc title entry screen (while the total track number
appears) or track title entry screen (during playback,
pause, or recording) appears in the main display.
For the disc title
For the track 1 title
• For the group title:
Press MD TITLE/EDIT twice while the GROUP
indicator is lit on the display.
Group title entry screen appears in the main display.
• If you want to select the title entry screen again, press
ENTER, then repeat this step.
3
Select the desired title entry screen.
• For the disc title:
Press 4/1 repeatedly until "DISC TITLE?"
appears in the main display.
• For the track title:
Press ¡/¢ or 4/1 repeatedly until the
desired track number and "TITLE?" appear in the
main display.
• For the group title:
Press GROUP
desired group number ("GR" and the number) and
"TITLE?" appear in the main display.
4
Press SET.
The MD recorder enters one of the following title entry
screens.
• Disc title entry screen:
• Track title entry screen:
Ex. When the track 1 is selected
• Group title entry screen:
Ex. When the group 1 is selected
5
Input character(s).
1) Press DISP./CHARA to select the character set
you want.
• Each time you press the button, the character sets
change as follows:
Numerals
– 61 –
or repeatedly until the
Character entry
position
Character set
Capital letters
& Symbols
Small letters
& Symbols