Recording Cds-Cd Synchronized Recording - JVC NX-MD1 Instructions Manual

To deactivate this function, press GROUP.
"GROUP OFF" appears in the main display and the
GROUP indicator goes off from the display.
Recording CDs—CD Synchronized
Recording
Using the synchronized recording methods, you can start
and stop CD play and MD recording at the same time.
• If you want to adjust the recording level, see page 40.
When you do not want to use Group recording function,
press GROUP on the remote control to turn off the
GROUP indicator on the display.
You can assign the titles during recording. For details, see
page 60.
1
Insert a recordable MD into the MD loading slot
while the unit is turned on.
2
Prepare a CD.
• Press CD 3/8, then press 7 after loading a CD.
• You can make a program (see page 25) or select
Random play mode (see page 26) if you want. In this
case, do not start playing CD.
3
Press REC TIME on the remote control to select the
recording length mode.
• Each time you press the button, the recording length
mode changes as follows:
SP REC
The indicator corresponding to the selected recording
length mode lights up on the display.
Recording length
mode indicator
B A S S
CD
OVER
OVER Recording speed
indicator
indicator
• For the recording length mode, see "Stereo Long-
Hour Recording (MDLP)" on page 39.
• If you want to select "x4 SPEED" recording, select
"SP."
LP2 REC
LP4 REC
RECORDING indicator
RECORDING
2 4
SP LP LP
x x 1 2 x 4
GROUP
GROUP
indicator
4
Press REC SPEED on the remote control to select
the recording speed.
• Each time you press the button, the recording speed
changes as follows:
x 1 SPEED
The indicator corresponding to the selected recording
speed lights up on the display.
• If you want to record using Program or Random play
mode, select "x1 SPEED" or "x2 SPEED."
• You can adjust the recording level only when "x1
SPEED" is selected.
5
Press REC START on the unit.
The RECORDING indicator lights up on the display
and the recording starts.
After the recording ends, both the CD player and the
MD recorder stop automatically.
To stop recording, press 7.
"WRITING" flashes for a while. Both the CD player and
the MD recorder stop automatically.
To record a single track during playback
Press REC START on the unit while the desired track on
the CD is played back (regardless of the play mode).
The playback of that CD track stops, and the same track
starts playing back from the beginning again. Then, the
recording starts.
After the recording, both the CD player and the MD
recorder stop automatically.
To change the information shown in the main display
while recording
On the remote control ONLY:
Each time you press DISP./CHARA, the information in the
main display changes as follows:
CD track number and
remaining playing time
Remaining recording
time of MD
* When Group recording is activated.
** "0:00" flashes in the main display, before you set the
built-in clock (see page 11).
– 42 –
Continued
x 2 SPEED
x 4 SPEED
MD track number and
group number*
Recording speed and
length mode
Clock time**