Ungrouping Tracks-Ungroup; Ungrouping Tracks (Ungroup); Dissolving All Groups-Ungr All; Dissolving All Groups (Ungr All) - JVC NX-MD1 Instructions Manual

Ungrouping Tracks—UNGROUP
This function allows you to dissolve a single group.
You cannot erase the tracks using this function.
Once tracks are ungrouped, the other groups are
renumbered.
• To stop any time during the editing process after step 3 ,
press MD TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very first—that is, inserting a disc. You can also edit an MD
during playback (in Normal play mode).
1
Insert an MD you want to edit into the MD loading
slot while the unit is turned on.
• If the GROUP indicator is not lit on the display, press
GROUP to activate this function.
2
Press MD TITLE/EDIT repeatedly until
"UNGROUP?" appears in the main display.
• If the loaded MD has no group, "UNGROUP?" will
not appear.
• If you want to stop this editing process, press
ENTER.
3
Press SET.
• During playback:
The group number of the current track will appear. If
the track does not belong to any groups, group
number will be indicated by "– –."
4
Press GROUP
want to dissolve.
Ex. When the group 3 is selected
• During playback:
The tracks in the selected group are played back
repeatedly.
5
Press SET.
• To cancel the setting, press CANCEL, then repeat
step 4 .
6
Press ENTER.
"EDITING" appears in the main display for a while,
then "WRITING" flashes while the editing you have
made is being recorded on the MD.
Dissolving All Groups—UNGR ALL
This function allows you to dissolve all the groups.
You cannot erase the tracks using this function.
• To stop any time during the editing process after step 3 ,
press MD TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very first—that is, inserting a disc. You can also edit an MD
during playback (in Normal play mode).
1
Insert an MD you want to edit into the MD loading
slot while the unit is turned on.
• If the GROUP indicator is not lit on the display, press
GROUP to activate this function.
– 53 –
or to select the group you