Connecting An Md Recorder, Etc (Optical Digital Output); Compu Play; Automatic Power On - JVC FS-X1AC Instructions Manual

Compact component system
Table of Contents

Advertisement

Getting Started

Connecting an MD Recorder, etc (Optical Digital Output)

Unplug the cap and connect an optical digital cord (not supplied) between the System's OPTICAL DIGITAL OUT terminal
and the input terminal of the MD recorder, etc.
You can record the digital output signal from the System's CD Player to the MD recorder, etc.

COMPU PLAY

JVC's COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, turn on the radio, or listen to an external equipment with a single press of the
play button for that function. One Touch Operation turns the power on for you, then starts the function you have specified. If
the System is not ready (no CD in place), the System still powers on so you can insert a CD.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Remote Control
3
CD
/8 button
FM/AM button
LINE button

Automatic Power On

The System automatically turns on with the following operation.
• When you press the 0 CD button on the Unit or the CD DOOR 0 button on the Remote Control, the System automatically
turns on and the CD door opens to allow CD setting. However, this operation does not change the source to CD.
When you press the STANDBY/ON
opened.
9
Cap
button to turn off the System, the CD door will be automatically closed if it is
Optical digital cord
(not supplied)
MD recorder, etc.
(not supplied)

Advertisement

Table of Contents
loading

Table of Contents