Adding A Track To A Group-Entry Gr; Adding A Track To A Group (Entry Gr); Group - JVC NX-MD1 Instructions Manual

Adding a Track to a Group—ENTRY GR
This function allows you to enter a track into a group. The
track will be added as the last track in the selected group.
The track numbers will be renumbered.
• To stop any time during the editing process after step 3 ,
press MD TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very first—that is, inserting a disc. You can also edit an MD
during playback (in Normal play mode).
1
Insert an MD you want to edit into the MD loading
slot while the unit is turned on.
• If the GROUP indicator is not lit on the display, press
GROUP to activate this function.
2
Press MD TITLE/EDIT repeatedly until "ENTRY
GR?" appears in the main display.
• If the loaded MD has no groups, "ENTRY GR?" will
not appear.
• If you want to stop this editing process, press
ENTER.
3
Press SET.
• During playback:
The current track number starts flashing.
4
Press ¡/¢ or 4/1 to select the track.
• You can select the track using number buttons. In this
case, the selected track starts playback repeatedly.
Ex. When track 10 is selected
• During playback:
The selected track starts playback repeatedly.
5
Press SET.
• When the selected track belongs to the group, its
group number appears in the main display.
• To cancel the setting, press CANCEL, then repeat
step 4 .
6
Press GROUP
Ex. When group 2 is selected
• During playback:
The tracks in the selected group are played back
repeatedly.
7
Press SET.
• To cancel the setting, press CANCEL, then repeat
step 4 .
8
Press ENTER.
"EDITING" appears in the main display for a while,
then "WRITING" flashes while the editing you have
made is being recorded on the MD.
When "CANNOT ENTRY" appears in the main
display
You are trying to enter a track in a group into the same group
again. Repeat procedure from step
– 49 –
or to select the group.
6
.