Playing Tracks In A Group-Group Play - JVC NX-MD1 Instructions Manual

To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows you to start playing
the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
To locate a particular point in a track during play
Press and hold ¡/¢ or 4/1 (¢ or 4 on the
unit).
• ¡/¢ (¢) : Fast-forwards the tracks.
• 4/1 (4) : Fast-reverses the tracks.
To change the information shown in the main display
On the remote control ONLY:
Each time you press DISP./CHARA, the information in the
main display changes as follows:
When you press DISP./CHARA while the track number
is shown:
(Elapsed) playing time and Track title* =
Group title* = Remaining recording time*** =
Clock indication** = (back to the beginning)
When you press DISP./CHARA while the total track
number is shown:
Total playing time and Disc title* = Remaining
recording time = Clock indication** = (back to the
beginning)
* When a track, group or disc has no title, "NO TITLE"
appears. If the current track does not belong to any groups,
"UNGROUP TRK" will appear.
** "0:00" flashes in the main display, before you set the
built-in clock (see page 11).
*** During playback, this indication is skipped.
About MD indicator
MD MD
Source is An MD is
"MD" loaded
MD MD
During During
playback pause
– 29 –
Playing Tracks in a Group—Group Play
You can play back tracks in a group.
• To make a group or edit groups, see pages 45 to 54.
On the remote control ONLY:
1
Load an MD including a group(s).
2
Press MD 3/8, then 7.
The source is changed to "MD."
• When the loaded MD has no group, the total group
number does not appear in the main display.
3
Press PLAY MODE repeatedly until "MD GROUP"
appears in the main display.
The GR. indicator also lights up on the display.
• Each time you press the button, play mode changes
as follows:
MD PROGRAM
(Program play)
MD NORMAL
(Normal play)
4
Press GROUP or
• GROUP : Selects group numbers in the
increasing order.
• GROUP : Selects group numbers in the
decreasing order.
The first track No.
of Group 2
EX. Group 2 is selected.
5
Press MD 3/8.
The tracks in the selected group are played.
Group play ends when all the tracks in the selected
group are played back.
To go to another track in the same group, press ¡/¢
or 4/1 (¢ or 4 on the unit) repeatedly.
• ¡/¢ (¢) : Skips to the beginning of the next or
succeeding tracks.
• 4/1 (4) : Goes back to the beginning of the
current or previous tracks.
To go to another group, press GROUP
the remote control repeatedly.
• GROUP : Skips to the first track in the next group.
• GROUP : Goes back to the first track in the current
or previous group.
Total Group No.
MD RANDOM
(Random play)
MD GROUP
(Group play)
to select a group.
Group No.
Playing time
or on