3 Controls and Indicators
Chapter 3 Controls and Indicators
The design of HIVAMAT
functions. Because of its small size, the instrument is very easy to transport. It has been designed for oper-
ation also outside of therapy rooms, and is fed by a rechargeable battery for that reason.
All controls and indicators are integrated into the housing, thus allowing for easy cleaning of the instru-
ment's surface and protecting it from dust. The instrument's microprocessor monitors the safety-related
components, prevents from erroneous operation and checks the instrument after switching it on.
3.1 Function of Controls and Indicators
The following section introduces the individual indicators and controls of HIVAMAT
Personal. The numbers in angle brackets refer to the
3.1.1 Display <1>
3.1.2 Data Selector <2>
HIVAMAT
™
200 Personal
™
200 Personal allows for easy operation, in combination with a variety of
The Data Selector <2> serves to select the therapy parameters shown
in the Display <1> as well as to adjust the intensity.
You can switch between the individual options by rotating the selector
and call the respective function by pressing it.
Instrument Overview
on page 5.
In the Display <1> the available options or therapy
parameters are shown, depending on the context.
The battery symbol on the upper right corner shows
you the current state of charge of the batteries (also
refer to
Battery Operation
You can select a parameter using the Data Selector
<2>.
PHYSIOMED ELEKTROMEDIZIN AG
™
200
on page 9).
7