Chapter 7 Individual Programs - Physiomed CHUDO HIVAMAT 200 Personal Manual

PHYSIOMED ELEKTROMEDIZIN AG

Chapter 7 Individual Programs

Individual programs allow you to adjust therapy parameters such as duty cycle and frequency. You have
two options for individual treatment:
• INDIVID Sequence
• INDIVID Manual
How to perform an INDIVID SEQUENCE treatment
(1) Choose INDIVID in the side menu to get to the individual programs:
Individual Treatment - Page 1 - Selection of Parameters
(2) Click again on INDIVID to get to the first page.
(3) Click again on INDIVID. You can now rotate the Data Selector <2> to select the current treatment
duration, the duty cycle (e.g. 3:1), the frequency (e.g. 200 Hz) and the treatment duration of the
three phases. Move the cursor, which is indicated by a horizontal bar, to the desired parameter.
To select the value of a parameter, first press the Data Selector <2> to activate the parameter. Then
rotate the Data Selector <2> to select the desired value.
(4) When you increase the intensity, the currently active phase is indicated by a black dot. The sequence
is completed phase after phase. Once the intensity is up you can only change the duty cycle and the
frequency. The duration within a sequence cannot be changed. Still, you can abbreviate (but not ex-
tend) the duration of the ongoing treatment.
(5) Click on the symbol < in the top row of the Display <1> to return to the overview page.
How to perform an INDIVID MANUAL treatment
(1) Choose INDIVID in the side menu to get to the individual programs:
Individual Treatment - Page 2 - Selection of Parameters
18
7 Individual Programs
HIVAMAT ™ 200 Personal