S+S Regeltechnik Rymaskon 600 Operating Instructions Manual page 43

Operating instructions
RYMASKON ® 600 - BACnet
RYMASKON 600 Series | Parameter Table | Last Updated: 23/03/2022 (EN)
RYMASKON ® 600 - Modbus
SYSTEM
Parameter name
Device ID
(Only BACnet Typs)
Service Pin
(Only BACnet Typs)
Brightness
Light intensity
Show Unit Swap
Unit toggle display
(°C/°F)
Lock Mode
Lock Code
Maintenance Code
Staff Code
Screen Refresh-Rate
Display Refresh-Rate
Screen Cycle Speed
Display cycle action circle
Native units (defaults)
°C/°F default
Language
User interface language
Show Language Swap
Toggle icon for language
selection
Reload Default
Preferences
Version
S+S REGELTECHNIK GMBH | THURN-UND -TA XIS - STR. 22 | D -90411 NÜRNBERG | GERMANY | FON +49 ( 0 ) 911 51947- 0 | w w w.S p lusS.de
Description
Unit ID (only for BACnet units)
BACnet Service-Pin.
If enabled, the unit sends a BACnet "I-am" message.
Display lighting in standby
Releases the icon to toggle between degrees Celsius and
degrees Fahrenheit on the main screen.
Releases the lock icon to lock the display. Select the
functions to be locked on the display (display lock):
(0) Disabled: Icon for hidden/inactive display lock
(1) On/Off Only: Display lock icon
displayed/active, temperature/fan adjustment not possible,
clearing and ECO icon disabled
(2) Adjust Only: Display lock icon
displayed/active, only temperature and
blinds adjustment possible
(3) No Input: Display lock icon
displayed/active, only blinds
adjustment possible
PIN for enabling/disabling the display lock
(0000: no PIN required)
PIN for setting mode
(0000 requires no PIN)
PIN to access secondary screen
(0000: no PIN required)
Refresh rate of the LCD touch screen
Toggle the readings shown in the
small circle on the display
Fast = 4.3s / medium = 7.8s / slow = 10.8s
Default value of the temperature display in degrees
Celsius or degrees Fahrenheit
NOTE:
Changes result in reloading the default values.
Available languages for the user interface (main screen)
Displays the toggle icon (language acronym)
to select the user interface language on the
main screen
Reload factory settings (defaults)
Software version
Range
0...4.194.303
(Default Auto = 651.001)
0 = Disabled (Default)
1 = Enabled
0...20 (Default 5)
0 = Disabled (Default)
1 = Enabled
0 = Disabled (Default)
1 = On / Off Only
2 = Adjust Only
3 = No Input
0000...9999 (default 0000)
0000...9999 (default 6666)
0000...9999 (default 0000)
0 = Fast (default)
1 = Medium
2 = Slow
0 = Fast
1 = Medium (default)
2 = Slow
C = Celsius (default)
F = Fahrenheit
0 = DE (Default)
1 = EN
2 = FR
3 = ES
4 = IT
0 = Disabled (Default)
1 = Enabled
0 = Off (default)
1 = On
x.xx (BACnet/Modbus)
43